Well I finally sat down today and finished most of the canopy. The cooling fans are finally installed so I can turn the blues up more than 45% and the whites above 20%.
Got the parts in for my ATO. Did the programing for the APEX last night and finished building the hangers for the float switches just now.
The one on the right is Sump_high, which is basically a safety one in case the other one gets stuck and the ATO adds too much water.
The one on the left is the main switch, when it drops it triggers the ATO pump which is a Aqua Lifter which does about 5 gallons an hour. The tank evaporates about 5 gallons a day.
I have 2 right now, but i am thinking of getting a 3rd one. For a safety of Sump_Really_Low, so basically if the main one gets stuck up and never triggers the pump, if the third one drops it would force the pump on.
The Aqua Lifter pumps from a 45 gallon brute trash can that I keep full of RO/DI water. Enough to last about 10 days.
Going on vacation in the middle of June, so this will give me enough time play around and make sure everything is working before than.
FEATURED SPONSORS OF THE MONTH
Posting Permissions
Reply With Quote
