Glass drilling bits needed

MuralReef

Administrator
Staff member
M.A.S.C Club Member
M.A.S.C. B.O.D.
MASC Vice-President
#1
I am hoping I can find these locally. I need two bits one for drilling 1/2" bulkheads and one for 1" bulkheads. Even better is a vendor has them and the bulkheads.
 

TheRealChrisBrown

Reef Shark
M.A.S.C Club Member
ex-officio
#2
I have the 45mm bit that will drill the standard 1" bulkhead sized hole. Kind of a long drive for a bit, but should you find yourself up north you can borrow it.....or if it is feasible bring the tank and drill it here at the house, at least the 1" holes you need.
 

zombie

Dolphin
M.A.S.C Club Member
#3
If nobody has one locally for you to borrow I have seen sizes ranging from 1/4" to 1" at home depot in the masonry bits section.

You might be an engineer if...You have no life and can prove it mathematically.
 
Top