1. Welcome to the shiny new site! Please have a look around and let us know how its working for you. Please note that all returning members will need to reset your passwords to login again. Click on "forgot password" to reset your password. If you still have issues then email us at board@marinecolorado.org Thanks
    Dismiss Notice
Dismiss Notice
Site Upgrade complete! A new version of the forum software has been uploaded. Please let us know if you have any issues. Thanks

Apex programming Vortech Mp40s

Discussion in 'General Reefkeeping Discussion' started by Legonch, Sep 16, 2017.

  1. Legonch

    Legonch Emerald Reef Supply M.A.S.C Club Member Featured Sponsor

    Does anyone have a good program/scheme they are using on vortechs for a mixed reef? Ive got a 180, with an mp40 on each side. Just getting started with these. Thanks!
  2. TheRealChrisBrown

    TheRealChrisBrown Barracuda M.A.S.C Club Member

    Do you use Apex Fusion?

    If you do, once the Vortech's are connected click on the little gear in the upper right of the slider bar where you and turn them on, off, or auto. Once that opens up there are some little tiles in the upper right, the second one in says "download scheme". Once in there click on discover and there should be several schemes to choose from. It might be a good place to start!
  3. Legonch

    Legonch Emerald Reef Supply M.A.S.C Club Member Featured Sponsor

    I do use fusion. I see the vortech program, but have no clue to what works best, etc. Been reading how to make one sync and one anti sync, its all chinese to me, ugh!
  4. JuanGutz

    JuanGutz Marlin M.A.S.C Club Member

    You still want the apex vortech module I have?

Share This Page