Okay I have no intention in starting this till hopefully around July just putting that out there if it can indeed be salvaged. Until then id like to get opinions on how to go about fixing it if you all think its possible. So ill pretty much let the pictures speak for themselves but ill try to explain as well. The tank has a horrible crack along the middle bottom panel, it starts from center right and works its away across the left to just before where the left and front panel meet. It cracked that corner pretty bad and then split the left and front panel from each other almost alway the way up. On the left back corner with the back black panel it looks like that seems tried to split before and had been repaired. I know nothing about acrylic but doesn't look to be a repair I would trust. One of the top supports has cracked but I'm sure thats not a hard thing to fix since it will likely not be seen. Okay if you've made it this far thank you for reading!:smug: Any and all opinions are welcome, especially from those who have experience with acrylic. Other then that enjoy these ugly pictures!