Plumbing opinions

[Irishman]

You suggesting I turn the T then so it hits a "wall" and separates the flow?


Sent from my iPhone using Tapatalk

 

[projectx]

That or add a ball valve to the straight up shot then can tune it

 

[Irishman]

I don't have room to add a ball valve and split off as well.

Here is my second attempt at return pump so it kind of splits off the flow more evenly.

Sent from my iPhone using Tapatalk

 

[Balz3352]

I don't have room to add a ball valve and split off as well.

Here is my second attempt at return pump so it kind of splits off the flow more evenly.

Sent from my iPhone using Tapatalk

I like this much better flow should be more evenly distributed

 

[Huskyguy]

I would put the T in the middle and 2 unions. one at each side. hard plum it to the sump and then use a very short hose to connect it to the pump. hope that make sense?

 

[Irishman]

I understand what your saying. I'll keep that in mind if this doesn't work out.

The hose in working with is really stiff, I don't want to put too much pressure putting stuff together so it doesn't crack or break anything like it did on my 40 breeder


Sent from my iPhone using Tapatalk

 

[Irishman]

I would put the T in the middle and 2 unions. one at each side. hard plum it to the sump and then use a very short hose to connect it to the pump. hope that make sense?

Putting the T in the middle even the water flow out more, correct?


Sent from my iPhone using Tapatalk

 

[Huskyguy]

Putting the T in the middle even the water flow out more, correct?


Sent from my iPhone using Tapatalk

yes.

 

[projectx]

I was thinking instead of the T, put the ball in as well